등록 시 1개의 파일을 볼 수 있어요.
Polymer clay  (IMPORTANT - These sculptures are intended to be cured and hardened. It is not recommended that Learners use Plastalina or Play Dough. Model Magic or Air Dry may be used, but behaves very differently and does not hold detail as well.) *There are many brands of polymer clay / oven bake clay. See my recommendations below.

I recommend the following colors:
-Green
-Red
-White (Pearl White is my favorite!)
*Optional* - Glitter colors for extra sparkle!

Clay tools:
- clay knife, plastic straight edge knife, or other straight edge knife (I use an x-acto knife)
- clay roller (I use an acrylic roller)
- a ball sculpting tool or a small paint brush with a rounded end 
- a needle tool or toothpick
- a smooth surface to work on, such as a baking sheet or piece of cardboard lined with parchment paper. I work on a ceramic tile from the home improvement store. Clay is sticky and can stain, so it is not recommended to work on wood.

Baking tools (if your polymer clay requires oven curing):
- sheet pan or cookie sheet
- parchment paper or index card to bake your sculptures on

Artist Recommendations:
I recommend using Sculpey III, Sculpey Premo, Sculpey Souffle, Fimo, Kato, or Cernit brand polymer clay as they are easier to find. Of these, the Sculpey III brand is the least strong but soft to work with. If you are looking for sculptures to be stronger, Sculpey Premo, Sculpey Souffle, and Fimo Professional hold up better after baking but they are less soft. Fimo and Cernit both have varieties that are softer as well, but the same applies. Kato can be more firm sometimes, and bakes at a lower temperature so it is best not to mix with other brands. These brands all come in 2 oz. bars available at stores like Michael’s or JoAnn’s, or online at Sculpey . com , Creative Wholesale, or the Polymer Clay Superstore. I have also recently tested the "Crafter's" brand by Hobby Lobby. The Crafter's Collection Craft version is similar to Sculpey III or Craftsmart. The Crafter's Collection Advanced is extremely similar to Fimo Professional. I would choose the Advanced over the Craft Collection.

Please allow time for shipping if you choose to purchase supplies online. Clay bars are typically $2 - $4 per 2 oz. per bar. You can also buy multi packs that can sometimes be cheaper. The clay will not dry out if exposed to air, so it will last a while and can be used for other projects!

**My favorite clay for softness and durability right now is Cosclay, but it is more of an investment. They come in larger, 8oz - 16oz boxes. This clay is soft to work with, but does take a minute to condition for some colors. It is also very durable, and extremely flexible. You can find it at www.Cosclay.com or on Amazon.

The variety packs that are off branded on Amazon are sometimes okay, but they often have very soft clay that is a little tough to work with. Some kids like it that soft, but others may get frustrated with the texture as it is difficult to use to make details.

****SCULPEY GUIDE****
Sculpey is by far the most popular brand among my Learners. Sculpey is the brand, and then there are several different formulas under that brand. Each one is a little different, and sometimes it is best to try a few to see which one you may like. Here is a guide to Sculpey brand polymer clay varieties:

*Sculpey Bake Shop* - for little kids usually, very soft, not as durable but easy to use.

*Sculpey III* - a good beginner polymer clay for practicing. Usually very soft, which some like and some do not. Not the most durable, especially for thin parts.

*Sculpey Souffle* - this is a favorite with jewelry makers or people who like softer clay. It is soft, easy to mold, and is more durable even when thin.

*Sculpey Premo* - this is my favorite of the Sculpey clays. It is definitely more firm, but that also means it holds detail very well. It is also more durable.

*Sculpey Original* - usually white, gray, or beige. This is for sculptors who use a lot of tools and do a lot of detail work. It is a great, but does not come in colors. It can be painted with acrylic paints.

All of these Sculpey clays are oven bake clays, and can be mixed around and used with each other since they bake at the same temperature (275 degrees Fahrenheit).

Another great resource is https://thebluebottletree.com/tag/library/

If you have any other questions about tools, materials, or colors then please send me a message.

아웃스쿨 사이트의 기능 외 별도의 앱이나 웹 사이트를 사용할 필요가 없습니다.

Parental supervision or guidance is suggested for inexperienced or younger learners. Polymer clay should be used on a non-porous surface (a metal sheet pan covered with parchment paper, or a piece of marble, or just parchment paper laid out). Learners should avoid touching their mouth when working with polymer clay. Learners should also wash their hands thoroughly after working with polymer clay.

Parents will need to help their learner cure the sculpture by baking it in the oven after class. Place the sculpture on parchment paper or an index card on a baking sheet. Bake for the amount of time given in class at 275 degrees (275 is for Sculpey Premo; For other brands, please check the packaging for the recommended baking temperature). Let it cool completely before handling.