FDM 3D 프린팅 소개
이 수업은 필라멘트 구동 기계를 사용한 3D 프린팅에 대한 소개입니다. 설정, 슬라이서 설정, 좋은 해상도와 품질을 유지하면서도 프린팅 시간을 최소화하는 기술에 대한 기본적인 주제를 다루고 기본적인 3D 모델링도 간략하게 다룹니다.
무엇이 포함되어 있나요?
2개의 라이브 미팅
주당 수업 4 시간프로젝트
주당 2-4시간. These projects will involve printing different various models that require certain settings to be changed in the slicer in order to print perfectly.학습 평가
These assessments will be done after each model is printed and shown in class.보고계신 지문은 자동 번역 되었습니다
수업 소개
영어 수준 - 알 수 없음
미국 8학년 - 11학년 학년
레벨 Beginner
multiple topics will be covered for a starter on FDM 3D Printing, I teach with a very hands on (working on their 3D printers while teaching). I teach at a slow pace that may seem too slow for people but makes sure that every student is not left behind, the more that is explained to a slower student helps the class understand 3D printing in its entirety. This class as I said is all hands on and therefore a passing grade is proficiently knowing how to use your printer.
학습 목표
Printer setup and terminology. If students have not yet taken their printer out of the box, we will cover how to assemble it and learn the basic needs of the setup to get a perfect first 3D print.Slicer Settings. A slicer is what is used to cut a 3D model up into layers so that the printer knows where to start and end.
그 외 세부 사항
학습 요구
This class will be paced as everyone understands it, if too much time is taken up there will be links to videos that can help people stay at the level that the class is at
학부모 가이드
gloves and eyeglass wear is recommended to be worn when a print is taken off of the print bed for post processing cleanup (removal of supports)
사전 요구 사항
Basic Mathematics is required, as 3D printing is math/engineering based.
수업 자료
Links to masters of 3D printing will be posted every session so that everyone can refer it with complete understanding.
수업 진행 언어
영어
Outschool 외 필요 앱/웹사이트
아웃스쿨 사이트의 기능 외 별도의 앱이나 웹 사이트를 사용할 필요가 없습니다.
출처
A few youtube channels will be used as references in case some things were unclear in the class session.
가입일: December, 2024
교사 전문성 및 자격증
I taught 3D modeling in Solidworks for a year as a TA (it was the professors first year and we were tasked on teaching the class to make sure the professor had everything in order).
I also have 6 years of personal training and experience in setting up FDM printers and making sure that they run perfectly. 리뷰
실시간 그룹 수업
US$40
주간( US$20 클래스당 개)주당 2회
120분
실시간 화상 수업
연령: 14-18
수업당 학습자 1-10 명
