"Bling It on: Teen Jewelry Design Lab"
저희의 쥬얼리 클래스에서 쥬얼리 제작 기술을 배워보세요. 3개의 1시간 세션에서 우리는 지지적이고 경쟁적이지 않은 환경에서 스트레치 브레이슬릿, 구슬 귀걸이, 목걸이를 만들 것입니다.
무엇이 포함되어 있나요?
3개의 라이브 미팅
수업 3 시간숙제
주당 1시간. Students will be asked to make a beaded jewelry piece to show and tell about at the beginning of our next class.보고계신 지문은 자동 번역 되었습니다
수업 소개
영어 수준 - 알 수 없음
레벨 Beginner
Keep in mind that this class meets for 1 hour 30 minutes each session. The class dates are as follows:
The class meets on 3 consecutive Tuesdays April 2nd, April 9th and April 16th
Here’s what we will be learning in each class.
Week of April 2nd : Project #1 Beaded Hoop Earrings
Week of April 9th: Project #2 Beaded Necklace
Week of April 16th: Project #3 Stretch Bracelet
What Students Will Learn
Basic Jewelry-Making Skills:
Each session of this class focuses on one type of jewelry piece. In the first session we will make hoop earrings, then in the second session a necklace and then finally in the last session we will make stretch bracelets. Students will learn how to use jewelry making pliers and crimp tool to secure beads onto wires and necklaces. We will learn how to design a bead pattern and then close the piece so it is secure for the wearer.
Tools and Materials:
Don’t worry if you don’t have all the class materials needed on the first day. Just make sure you purchase what you need for the first day. You can then take the next week to order or go out and shop for the rest of the materials.
Students will need access to jewelry making hand tools, beads and other items. A detailed supply list can be found in the Materials section. I will provide a link to Michaels.com where parents can purchase these and other materials if they don’t already have them.
Safety Precautions:
Before using the tools, students will receive thorough instruction and a clear demonstration on safety precautions to ensure safe handling and usage.
Teaching Procedure:
Through live demonstrations, step-by-step live instructions and also pre-recorded videos students will see very clearly how to hold the tools and how to easily string beads of any size onto the nylon covered wire, earring wires and stretch cord. Students can expect personalized feedback on their individual technique for holding the tools and using them and I will provide corrective feedback where needed.
No Experience Necessary and Non-competitive Class Atmosphere:
This class is suitable for beginners with no prior experience in jewelry making. I plan to create an atmosphere free of judgement where students support and encourage each other. Students will also be inspired by showcased pieces, fostering creativity and idea generation. The informal setting encourages collaboration, mirroring a creative studio atmosphere, where students freely exchange ideas and seek input from peers.학습 목표
After taking this class students should be able to independently design and complete a necklace, bracelet and a pair of earrings without any assistance.
강의 계획서
3 레슨
3 주 이상레슨1:
Let Make a Pair of Beaded Earrings
In this lesson we will make a pair of beaded earrings using seed beads, earring wire and earring hooks. 60 분 온라인 라이브 레슨
레슨2:
Lets Make a Necklace
In this lesson we will design and make a necklace out of seed beads or whatever beads your student likes. 60 분 온라인 라이브 레슨
레슨3:
Let Make a Stretch Bracelet
In this lesson we will make a stretch bracelet using beads and stretch cord. 60 분 온라인 라이브 레슨
그 외 세부 사항
학부모 가이드
We will be using wire cutters and crimp tools. The wire cutter works much like a scissor and is equally as dangerous. Care needs to be taken when handling the wire cutter because it can nip, scratch, cut or pierce through skin.
The crimp tool is used to press a metal tube closed around the wire and can present the danger of pinching fingers or any skin close to the tool when using it so care needs to be taken.
Beads come in various shapes, sizes and finishes and can be dangerous. Please check the manufacturers label for any warnings with respect to the beads you decide to purchase.
사전 요구 사항
Students should have enough dexterity and strength to manipulate the tools.
수업 자료
NOTE:
Don’t worry if you don’t have all of the materials for the entire course on the first day. For the first day we will be making beaded hoop earrings so just make sure you have the earring fish hooks, flex-rite earring wire, beads in variety of colors that you would like to see on an earring and jump rings. For tools on day 1 you will need two flat nose pliers and one round nose pliers.
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
DAY ONE - EARRINGS - MATERIALS NEEDED
* 1 pack of earring fish hooks with coils
https://www.michaels.com/product/earring-fish-hooks-with-coils-by-bead-landing-10697281
* 2 U-shaped earring wires
https://www.michaels.com/product/bead-landing-silver-earring-wire-hoop-mix-10443059?michaelsStore=5808&inv=3
.
* size 6/0 or 8/0 seed beads in at least 3 different colors
SIZE 6/0 SEED BEADS:
https://www.michaels.com/product/glass-seed-beads-by-bead-landing-60-10627307? michaelsStore=5808&inv=1
SIZE 8/0 SEED BEADS:
https://www.michaels.com/product/john-bead-czech-glass-seed-beads-80-10549075?michaelsStore=5808&inv=1
* 4 jump rings measuring 12 mm
https://www.michaels.com/product/jump-rings-50ct-by-bead-landing-10697451?michaelsStore=5808&inv=8
* Tray ( or something to prevent the beads from rolling off of the work surface if they fall )
https://www.michaels.com/product/stackable-plastic-jewelry-utility-tray-15h-166289269593915395
* Bead Mat
https://www.michaels.com/product/beadalon-bead-mats-10348546?michaelsStore=5808&inv=3
* 2 Accent Beads ( they should be the same if you want the earrings to match )
https://www.michaels.com/product/10-18mm-smooth-round-red-vintage-plastic-beads-186041264676618251
* 1 Round nose Pliers
https://www.michaels.com/product/bead-landing-round-nose-pliers-10035773?michaelsStore=5808&inv=2
* 2 flat nose pliers
https://www.michaels.com/product/john-bead-multi-purpose-stainless-steel-flat-nose-jewelry-econo-pliers-D717368S michaelsStore=5808&inv=3
NOTE: Students should get the same color jump rings, earring wire and earring fish hooks if possible.
————————————————————————————————————————————————————————————
—————————————————————————————————————————————————————————- —-
DAY TWO - NECKLACE - MATERIALS NEEDED
A NOTE ABOUT PURCHASING TOOLS:
It might be more economical to purchase one of these:
https://www.michaels.com/product/bead-landing-3-in-1-pliers-10397508
( This one tool takes the place of 3 tools. It’s called a 3-in-1 and can save you some money )
If you purchase one of these ( above ) you will still have to purchase the following tools:
* Wire Cutter ( or Scissors )
https://www.michaels.com/product/side-cutter-by-bead-landing-10334526?michaelsStore=5808&inv=2
* 2 ( TWO ) flat nose pliers
https://www.michaels.com/product/super-fine-chain-nose-pliers-by-bead-landing-10443474? michaelsStore=5808&inv=3
* 1 crimp tool ( Please do not purchase the micro crimp pliers )
https://www.michaels.com/product/beadalon-standard-crimper-tool-10332396?michaelsStore=5808&inv=2
OTHER MATERIALS NEEDED:
* size 6/0 and 8/0 seed beads in the color of your choice ( Pick the colors that make your heart sing in at least 3 different colors
* size 6/0 SEED BEADS:
https://www.michaels.com/product/glass-seed-beads-by-bead-landing-60-10627307?michaelsStore=5808&inv=1
* size 8/0 SEED BEADS:
https://www.michaels.com/product/john-bead-czech-glass-seed-beads-80-10549075?michaelsStore=5808&inv=1
* A few ( 3 or 4 ) accent beads ( the link below is just one example )
https://www.michaels.com/product/10-18mm-smooth-round-red-vintage-plastic-beads-186041264676618251
* Bead Stringing Wire
Flex-Rite stainless steel 7 strand nylon coated wire
size: .018 mm
https://a.co/d/fhi7JQn ( Here it is on Amazon since Michaels does not have this online. )
* Metal chain
https://www.michaels.com/product/6yd-gold-curb-chain-by-bead-landing-10696992? michaelsStore=5808&inv=4
* Lobster clasps
Size: 12mm
https://www.michaels.com/product/12mm-lobster-clasps-by-bead-landing-10473883?michaelsStore=5808&inv=5
( If you are having trouble locating size 12mm sizes 13 mm, 14mm or 15 mm will work just as well.
NOTE:
( Lobster Clasps come in a pack of many or you can purchase a few in a pack. I suggest getting at least 10 so your student can make at least 5 necklaces and 5 bracelets. These pieces are small so they can fall and then get lost in the carpet shag or behind furniture so make sure you have enough to cover these situations. The price varies greatly on these.
* 1 Pack assorted crimp beads
https://www.michaels.com/product/assorted-metal-crimp-tubes-600ct-by-bead-landing-10697731
* Bead Organizer Trays or small bowls to keep beads organized and
easily accessible during the jewelry making process.
https://www.michaels.com/product/clear-turquoise-8-compartment-storage-box-by-bead-landing- 10505021?michaelsStore=5808&inv=2
* Measuring tape to determine wrist size ( a ruler will not work )
https://www.michaels.com/product/loops-threads-tape-measure-60-10340669
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
DAY THREE
STRETCH BRACELET
* Wire Cutter ( or Scissors )
https://www.michaels.com/product/side-cutter-by-bead-landing-10334526?michaelsStore=5808&inv=2
* .032 inch ( 0.8 mm) transparent stretch cord
https://www.michaels.com/product/elasticity-stringing-cord-8mm-clear-25-meters-166288368395173918
* variety of beads in different colors, shapes, and sizes. These beads should be larger sized beads than we used in the necklace and earring because we want to experiment with larger size beads. Please make sure the cord can go through the hole of the beads.
Aim for beads with holes large enough to easily thread the cord through.
Recommended bead sizes: 6mm to 10mm diameter.
NOTE ON BEAD SIZE:
A good rule of thumb for the size of beads to use with stretch cord is that the hole of the bead should be at least twice the diameter of the cord. In this case the cord diameter is .032 inches, so you want beads with a hole of at least .064 inches (or 1.63 mm).
This will allow the cord to move through the bead easily and reduce the chance of the bracelet breaking. You can certainly go larger than .064 inches, but that will affect the look and wearability of your bracelet.
IMPORTANT NOTE:
It's essential to test the bead size with the cord prior to the start of our class to ensure a proper fit before stringing all the beads onto the bracelet. I would hate for your student to not have the proper bead size and combination of cord diameter.
* Measuring tape to determine wrist size
https://www.michaels.com/product/loops-threads-tape-measure-60-10340669
* Optional: Bead Stopper or Tape
https://www.michaels.com/product/beadalon-small-pink-tip-bead-stoppers-D521866S
( Used to secure one end of the cord while stringing the beads to prevent them from sliding off. )
If you have any questions on materials or if you are not sure what to purchase please don’t hesitate to reach out to me. Please send me a list of the supplies you have so that I can be sure you are ready for class each week.가입일: December, 2019
교사 전문성 및 자격증
뉴욕 교직증명서 특수 교육에
I am a former classroom teacher now traveling the world and selling my jewelry at art fairs and craft shows. I have only recently started making beaded jewelry and have had great success selling these pieces at art fairs. 리뷰
실시간 그룹 수업
매주
US$12
또는 3 회 수업에US$353주 동안 주당 1회
60분
실시간 화상 수업
연령: 13-18
수업당 학습자 3-6 명
