Arte con arcilla polimérica 3: esculpe una figura de mago, bruja o dragón mágico (avanzado)

Clay
- Less than 1 oz. of black polymer clay for eyes
- 2 oz. of the desired main color for the wizard dragon. Some suggestions are red, yellow, blue, green, or purple. (For example, the dragon in the classroom photo is dark blue).
-1 oz. of each desired accent color. Some suggestions are gold, black, bronze, silver, or white. The accent color should compliment the main color. (For example, the dragon in the class photo has black accents, and a bit of silver).
***IMPORTANT - These sculptures are intended to be cured and hardened. It is not recommended that Learners use Plastalina or Play Dough. Model Magic or Air Dry may be used, but behaves very differently and does not hold detail as well.***

Sculpting tools (bring to each class!): 
- a ball sculpting tool or a small paint brush with a rounded end 
- a sculpting knife or a straight-edged butter knife 
- an acrylic roller or larger paint brush 
- a clay smoothing tool or silicone nail art brush
- a needle tool or toothpick
- other desired tools

Other materials:
- A small piece of aluminum foil (approximately 5 inches should be plenty)
- parchment paper
- an index card or small piece of cardstock
- a smooth, clean, non-porous surface to work on. I use a ceramic tile from the home improvement store. You can also use a piece of parchment paper wrapped around a piece of carboard and taped down so that it stays. I do not recommend working on aluminum foil as it gets wrinkled easily.

Artist Recommendations:
I recommend using Sculpey III, Sculpey Premo, Fimo, Kato, or Cernit brand polymer clay as they are easier to find. Of these, the Sculpey III brand is the least strong but soft to work with. If you are looking for sculptures to be stronger, Sculpey Premo and Fimo Professional hold up better after baking but they are less soft. Fimo and Cernit both have varieties that are softer as well, but the same applies. Kato can be more firm sometimes, and bakes at a lower temperature so it is best not to mix with other brands. These brands all come in 2 oz. bars available at stores like Michael’s or JoAnn’s, or online at Sculpey or the Polymer Clay Superstore. I have also recently tested the "Crafter's" brand by Hobby Lobby. The Crafter's Collection Craft version is similar to Sculpey III or Craftsmart. The Crafter's Collection Advanced is extremely similar to Fimo Professional. I would choose the Advanced over the Craft Collection.

Please allow time for shipping if you choose to purchase supplies online. Clay bars are typically $2 - $4 per 2 oz. per bar. You can also buy multi packs that can sometimes be cheaper. The clay will not dry out if exposed to air, so it will last a while and can be used for other projects!

**My favorite clay for softness and durability right now is Cosclay, but it is more of an investment. They come in larger, 8oz - 16oz boxes. This clay is soft to work with, but also very durable. You can find it at www.Cosclay.com or on Amazon.

The variety packs that are off branded on Amazon are sometimes okay, but they often have very soft clay that is a little tough to work with. Some kids like it that soft, but others may get frustrated with the texture as it is difficult to use to make details.

If you have any other questions about tools, materials, or colors then please send me a message.