US$180
for 10 classes
適合中級和高級學生的 Arduino 項目
由 6 位學習者完成
年齡 11-16
現場團體小班課程
平均評分：
4.9
評論數量：(145 評論)
即時視訊會議
每週1次，共 10 週
3-6 名學習者(每班)
55 分鐘
包含什麼
10 現場會議
9 小時 10 分鐘 上課時間我們無法翻譯此文，請刷新頁面並再試一次。
課堂經歷
In the class students will be assigned Arduino projects that utilize multiple sensors and actuators, such as real time clocks, RFID readers, LEDs, keypads, remote controls, servos, LCDs. and other displays. Students will create projects including a Jukebox, an alarm clock/weather station, a keypad lockbox, an RFID door alarm system, and simple games using an 8x8 LED display. During class, I provide guidance and direction either through TinkerCad or Fritzing circuit diagrams and PowerPoint presentations, demonstrating how to connect the devices using jumper wires and breadboards. During the class, I ask students to think about and map out the sequence for how the Arduino program should be designed, including the types of variables needed, useful functions, and the general flow of the program. My goal is to help them learn how to create a code that flows and does the task they want to accomplish. It is recommended that students purchase an Arduino Mega (see supply list for link) because some of the sensors use many of the 14 available digital pins on the Arduino UNO, leaving very few available for additional connections. It is also recommended that students have the backpack for the LCD to limit the number of pins required to hook it up. (see supply list). This class is for intermediate to advanced students who are familiar with Arduino coding and who know how to use a wide variety of sensors, motors, breadboards, and displays. Students should either have completed my 3 part series of Arduino courses or have gained knowledge from similar experiences. Students should also know how to download and attach libraries to the Arduino program, or already have them downloaded. Projects will use some or all of the device listed in the supply list. So please be sure that you have them. While I am supplying a list of project ideas, I am flexible and welcome student suggestions for other projects that they wish to design. My list of projects ideas and the schedule is as follows: Weeks 1 and 2: LCD alarm clock that displays the time, temperature and humidity Weeks 3 and 4: RFID-controlled door with alarm with LCD display Weeks 5 and 6: Keypad lock box with LCD display Weeks: 7 and 8: Jukebox with LCD display that plays songs at the touch of a button Weeks 9 and 10: Games using the 8x8 LED matrix such as Retro Snaker, and Pong, Dice roll
學習目標
The goal of this class is help students improve their coding skills by creating various projects that use multiple sensors and actuators. Students will help design projects and the structure of the code.其他詳情
父母的引導和規範
I will be using a simulation called TinkerCad to demonstrate how to wire the projects. The simulation will only be used as a demonstration using the screen share option on Zoom.
供應清單
Projects will use some or all of these devices: LED RGB LED servo potentiometer pushbutton ultrasonic sensor stepper motor RFID reader Water Level Sensor rotary encoder Photoresistor (LDR) PIR (Motion sensor) Thermistor DHT-11 (digital humidity and temperature sensor) Remote Control tilt sensor Keypad Sound Sensor Passive Buzzer Active Buzzer Real Time Clock (DS1307) Accelerometer/Gyroscope (MPU6050) DC motor H-Bridge (L293D motor driver) LCD 7 digit LED display 4-digit LED display 8x8 LED Matrix The following kit is recommended since it includes all the necessary components: There are two versions, the UNO version and the MEGA version: UNO Kit: https://www.amazon.com/EL-KIT-001-Project-Complete-Starter-Tutorial/dp/B01CZTLHGE/ref=sr_1_2_sspa?crid=3LESQJV4SM5JG&keywords=elegoo%2Bmost%2Bcomplete%2Bstarter%2Bkit&qid=1669301263&sprefix=elegoo%2Bmost%2Caps%2C105&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 or the upgraded system for UNO: https://www.amazon.com/dp/B08C4SK6H3/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B08C4SK6H3&pd_rd_w=janAw&content-id=amzn1.sym.88097cb9-5064-44ef-891b-abfacbc1c44b&pf_rd_p=88097cb9-5064-44ef-891b-abfacbc1c44b&pf_rd_r=F2YM7J98PZT7RPPMDJGW&pd_rd_wg=ebkNF&pd_rd_r=2f66e456-775c-455a-bde8-61f5cac3cb11&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw MEGA Kit:: https://www.amazon.com/dp/B01EWNUUUA/ref=sspa_dk_detail_4?pd_rd_i=B01EWNUUUA&pd_rd_w=janAw&content-id=amzn1.sym.88097cb9-5064-44ef-891b-abfacbc1c44b&pf_rd_p=88097cb9-5064-44ef-891b-abfacbc1c44b&pf_rd_r=F2YM7J98PZT7RPPMDJGW&pd_rd_wg=ebkNF&pd_rd_r=2f66e456-775c-455a-bde8-61f5cac3cb11&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1 Just the MEGA if you already have a kit: https://www.amazon.com/ELEGOO-ATmega2560-ATMEGA16U2-Projects-Compliant/dp/B01H4ZLZLQ/ref=sr_1_3?crid=3FKBBSZ1MM9H&keywords=arduino+mega+2560&qid=1669301745&s=industrial&sprefix=MEGA+arduino%2Cindustrial%2C101&sr=1-3 LCD with i2C backpack: https://www.amazon.com/Interface-Characters-Display-Monitor-Compatible/dp/B07PFBDDYB/ref=sr_1_3?crid=Y3PKP5MLR8LF&keywords=16x2+lcd+i2c&qid=1669301953&s=industrial&sprefix=lcd+with+i2c%2Cindustrial%2C98&sr=1-3 i2C backpack only: https://www.amazon.com/HiLetgo-Interface-LCD1602-Address-Changeable/dp/B00VC2NEU8/ref=sr_1_1_sspa?crid=3GEXZP8PNE4CK&keywords=i2c+backpack+for+lcd&qid=1669302006&s=industrial&sprefix=i2c+backpack+for+lcd%2Cindustrial%2C94&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
外部資源
除了 Outschool 教室外，本課程也使用：
認識老師
教師專業知識和證書
俄亥俄州 教學證書 在 中學教育
2 個學位
碩士 在 科學 從 Case Western Reserve University
學士學位 在 科學 從 Stern College for Women Yeshiva University
I have been a private school middle and high school science teacher for over 30 years and an Outschool teacher for over 2 years. During that time, I taught classes in chemistry, engineering, earth science, life science, chemistry, forensic science, biology, and health. I enjoy teaching through hands-on experimentation and I believe that students learn best when they are activity engaged in the learning process and when they connect new concept with prior experiences. I have both a bachelor's and a master's degree in chemistry, as well as a secondary chemistry education teaching certificate from the state of Ohio.
On Outschool, I teach a variety of hands-on experiment classes in the areas of chemistry and physics, as well as Arduino coding classes. In my science classes, I focus on experiments that can be performed using household materials. I build on student's prior knowledge and experience and try to make learning fun. I like to introduce the topic, assess student knowledge, explain the experiment, and then discuss the science behind it.
My Arduino coding classes focus on basic coding skills needed to program an Arduino microcontroller. Students learn about the Arduino, how to write code that allows it to read input from sensors, and send output to actuators. Students are guided through the wiring and coding for each type of sensor and actuator so that they will eventually be able to create their own inventions.
I am an amateur photographer and love to photograph my grandchildren, my dog, and wildlife. My hobbies include scrapbooking and glass fusion. I also enjoy tinkering with my Arduino and 3D printer to create inventions of my own.評論
Elene Feigenbaum的其他課程
Elene Feigenbaum的其他課程
其他家長也喜歡
使用 Arduino 開始專案
Ian Nelson
4.7
(2,522)
US$18 每班
下次會議在 10 PM Thursday
團體課
6 週， 1/週， 50 分鐘
9-14
眨！ Arduino 程式設計簡介
Ian Nelson
4.7
(2,522)
US$18 每班
下次會議在 11 PM Mon 5/5
團體課
4 週， 1/週， 50 分鐘
9-13
Arduino 程式設計營
Elene Feigenbaum
4.9
(145)
US$18 每班
下次會議在 5 PM Mon 6/16
團體課
2 週， 5/週， 55 分鐘
12-17
使用 Uno R4 WIFI 微控制器建立 WIFI 控制的 Arduino 項目
Elene Feigenbaum
4.9
(145)
US$25 每班
下次會議在 2 PM Mon 4/28
團體課
2 週， 1/週， 55 分鐘
13-18
Arduino 編碼第 2 部分：讀取和使用感測器
Elene Feigenbaum
4.9
(145)
US$18 每班
下一堂課明天 7 PM
團體課
5 週， 2/週， 55 分鐘
13-17
Arduino 編碼第 1 部分：LED、舵機、按鈕、蜂鳴器等
Elene Feigenbaum
4.9
(145)
US$18 每班
下次會議在 6 PM Wednesday
團體課
10 週， 1/週， 55 分鐘
10-15
Tinkercad 機器人實驗室：使用 Arduino 和 Microbit 設計、編碼和建造小工具！
Create N Learn: Game-Based Learning & Future Skill
5.0
(26)
US$17 每班
下一堂課明天 3 PM
團體課
5 週， 2/週， 55 分鐘
8-10
1:1 輔導：程式設計、Arduino、遊戲、Unity、Python、JavaScript、C++、C#
Alex Fish
5.0
(7)
US$60 每堂課
一對一課程
依需求開班
7-18
年輕工程師 STEM 夏令營（科技、機器人和程式設計）
STEMworks
5.0
(32)
US$25 每班
下次會議在 4 PM Mon 5/12
團體課
1 週， 5/週， 55 分鐘
10-14
機器人技術簡介 - 建造機械手臂（編碼/編程和 STEM）
STEMworks
5.0
(32)
US$25 每班
下次會議在 3 PM Mon 5/12
團體課
4 週， 2/週， 55 分鐘
11-15
適合 6 - 11 歲兒童的編碼和電玩設計
Usama Puri
4.3
(21)
US$30 每班
下一堂課今天 5 PM
團體課
1/週， 55 分鐘
6-11
Tinkercad STEM 特別夏令營：設計機器人，學習電子技術
Create N Learn: Game-Based Learning & Future Skill
5.0
(26)
US$15 每班
下次會議在 10 PM Sun 6/1
團體課
2 週， 5/週， 55 分鐘
8-10
適合 6 - 11 歲兒童的現場程式設計課程
Usama Puri
4.3
(21)
US$30 每班
下一堂課今天 6 PM
團體課
1/週， 55 分鐘
6-11
適合 11 - 17 歲兒童的現場程式設計課程 [比例 2 : 1 ]
Usama Puri
4.3
(21)
US$30 每班
下次會議在 12 AM Mon 5/5
團體課
1/週， 55 分鐘
11-16
湯姆老師的 STEM 指導！按照您自己的步調 1:1 探索 STEM 項目
Teacher Tom Bickmore - Analog Astronaut
5.0
(286)
US$75 每堂課
一對一課程
依需求開班
5-18
適合 10 至 14 歲兒童的個人化即時編碼實驗室 [3 比 1 比例]
CodeWithUs
4.2
(137)
US$29 每班
下一堂課明天 4 PM
團體課
1/週， 1 小時
10-14
