Arduino 編碼第 3 部分：在工程專案中使用電子執行器
在這個 10 課程的課程中，您可以透過使用 TinkerCad 或實際組件來學習對揚聲器、馬達、伺服系統和 LCD 等各種致動器進行接線和編碼，為您的機器人或電子專案增添樂趣。
Elene Feigenbaum
平均評分：
4.9
評論數量：(129)
包含什麼
10 現場會議
9 小時 10 分鐘 上課時間我們無法翻譯此文，請刷新頁面並再試一次。
課堂經歷
英語程度 - 未知
Intermediate 等級
This class will teach how to use Arduino coding to control actuators, such as LCDs, motors and servos. Students will learn how about actuators, how to hook them up to the Arduino, and how to use Arduino libraries to control them. NOTE: This class will meet twice a week for five weeks or once a week for 10 weeks . Sunday classes meet once a week. During class, students will first be introduced to the concepts through PowerPoint slides, and then guided through the lesson for how to connect the components and how to write the code. Students will either use Arduino components that they have at home, or they will use a simulation program, called TinkerCad, to follow along. IMPORTANT: Before students take this class, they should have basic knowledge of the Arduino microcontroller, and know the basic format of Arduino coding and be familiar with how to use a breadboard. It is best if they already participated in my first two courses: Arduino Coding Part 1: LEDs, Circuits and Breadboards and Arduino Coding Part 2: Reading and Using Sensors. IMPORTANT: If you are using an actual Arduino, you will need to have access to a computer with a USB port, not just a chromebook or tablet because the Arduino IDE does NOT work on those devices. Please see the Learning Goals below for a list of topics covered in this class.
學習目標
Class 1: What are actuators?
- Definition
- Examples of actuators (motors, servos, LEDs, Displays)
- Digital actuators (LED, speaker, relay)
- Actuators that use digital pins but need libraries (servo)
- Uploading Libraries
- Actuators with shields or motor drivers
- Using PWM pins for controlling motors
Class 2: Active vs passive buzzer
- Using tone command
- Pitch library
- Using arrays
Class 3: Servos
- 180 vs Continous servos
- How to control 180 servo, sweep, knob
- -How to control continuous servo
Class 4: Stepper Motor and Motor Driver
- How to count steps (make a clock)
- Control stepper motor with a rotary encoder
Class 5: : LCD
- Library
- How to connect the LCD
- How to write to the LCD
- Read sensors and write value on the LCD
Class 6: LED array
Class 7: 7- segment LED
Class 8: 1-digit LED
Class 9: DC Motors
- Using transistor
- H-bridge and breadboard power supply
Class 10: Additional devices /Overview of other actuators/ small project
- Radio signals
- Bluetooth
- GPS
- Description of Final Project
其他詳情
先決條件
Students should have taken my Parts 1 and 2 classes or know the following: How to use an Arduino to read sensors and turn on LEDs, how to use breadboards, how to add libraries, understand "if," "while", "switch," and "for" commands.
供應清單
Students need to either have an account with www.autocad.com to use the free TinkerCad circuit simulator or download the free Arduino IDE from www.arduino.cc to use with the Arduino components. TinkerCad does NOT have many of the devices we will be using.
You can buy the components separately, but it would be more expensive than buying a kit that has all the parts you need and more. Either of these kits would be more than sufficient for this class. There are larger kits with more components, but they are not necessary for this class.
Recommended Devices/kits if you are purchasing components separately:
Arduino Uno (or clone) with USB cable
solderless breadboard
3 different color LEDs
3 1000-ohm resistors
3 220-ohm resistors
1-3 pushbuttons
1-3 potentiometers
1 servo motor
1 ultrasonic sensor
1 passive piezo buzzer
1 stepper motor and motor driver
1 DC motor
1 active buzzer
1 passive buzzer
1 LCD, preferably with backpack (https://www.amazon.com/Qunqi-Serial-Backlight-Arduino-MEGA2560/dp/B01E4YUT3K/ref=pd_rhf_se_p_img_2?_encoding=UTF8&psc=1&refRID=82F2F1N5PA4D76EEHV6H)
1 LED array
1 7-segment LED (1 digit)
1 - 4- digit LED
1 micro servo
1 continuous servo (optional)
Many male-male jumper wires of different colors
Many male-female jumper wires of different colors
Recommended Kit that contains all the parts:
https://www.amazon.com/EL-KIT-001-Project-Complete-Starter-Tutorial/dp/B01CZTLHGE/ref=asc_df_B01CZTLHGE/?tag=hyprod-20&linkCode=df0&hvadid=241907595991&hvpos=&hvnetw=g&hvrand=8544331822937541734&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015321&hvtargid=pla-464156272733&psc=1
This will make the LCD easier to work with:
https://www.amazon.com/Qunqi-Serial-Backlight-Arduino-MEGA2560/dp/B01E4YUT3K/ref=pd_rhf_se_p_img_2?_encoding=UTF8&psc=1&refRID=82F2F1N5PA4D76EEHV6H
Individual parts if you don't have the large kit:
Here are some items that you will need for this class:
8x8 LED matrix: https://www.amazon.com/Organizer-MAX7219-Display-Single-Chip-Control/dp/B07VM6HXN5/ref=sr_1_3?crid=YQ12DPYJV6VV&dchild=1&keywords=8x8+led+matrix+arduino&qid=1632697197&sprefix=8x8+arduino+mat%2Caps%2C199&sr=8-3
7 segment display: https://www.amazon.com/microtivity-7-segment-Display-Common-Cathode/dp/B004S95VJE/ref=sr_1_9?dchild=1&keywords=arduino+7+1+digit+segment+display&qid=1632697304&sr=8-9
4 digit display https://www.amazon.com/HiLetgo-Digital-Segment-Display-Arduino/dp/B01DKISMXK/ref=sr_1_2_sspa?crid=3IUD9L2USXBRF&dchild=1&keywords=arduino+7+segment+display&qid=1632697250&sprefix=arduino+7+seg%2Caps%2C200&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVDkxVFdGWVQwMk8xJmVuY3J5cHRlZElkPUEwMzc5MjkwN09GREFLQVJYWldZJmVuY3J5cHRlZEFkSWQ9QTA1NTY1MTcyNklTTjZOV0o5MzZEJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Optional but fun: Neopixels: https://www.amazon.com/Adafruit-NeoPixel-Ring-Integrated-Drivers/dp/B00KBXT9I0/ref=sr_1_2?dchild=1&keywords=neopixel+ring+adafruit&qid=1632697401&sr=8-2
https://www.amazon.com/Adafruit-NeoPixel-Ring-Integrated-Drivers/dp/B00KBXT9I0/ref=sr_1_2?dchild=1&keywords=neopixel+ring+adafruit&qid=1632697401&sr=8-2已加入 August, 2020
4.9
129評論
教師專業知識和證書
俄亥俄州 教學證書 在 中學教育
2 個學位
碩士 在 科學 從 Case Western Reserve University
學士學位 在 科學 從 Stern College for Women Yeshiva University
My classes will teach you coding skills needed to program an Arduino microcontroller. In these classes you will learn about the Arduino and how to write code that allows it to read input from sensors and send output to actuators. You will be guided through the wiring and coding for each type of sensor and actuator so that you will eventually be able to create your own inventions.
I have been a private school middle and high school science teacher for over 30 years. During that time, I taught classes in chemistry, engineering, earth science, life science, chemistry, forensic science, biology, and health. I enjoy teaching through hands-on experimentation and I believe that students learn best when they are activity engaged in the learning process.
I am an amateur photographer and love to photograph my grandchildren, my dog, and wildlife. I enjoy creating scrapbooks from my photos. I also enjoy tinkering with my Arduino and 3D printer to create inventions of my own.評論
現場團體小班課程
US$180
用於 10 課程每週2次，共 5 週
55 分鐘
有28 位學習者完成此課程
即時視訊會議
年齡: 13-17
1-10 每班學員人數
