US$15
weeklyor US$60 for all content
지금 등록하고 언제든 시작하세요
자신만의 속도로 학습해 보세요
학습자가 원할 때 학습을 시작하고 자신에게 가장 적합한 진도로 학습할 수 있습니다.원하는 시점에 시작하세요.
자신의 진도에 맞춰 학습하세요
수업 자료를 1년 동안 이용할 수 있어요.
선생님의 실질적인 지원을 받을 수 있어요.
무엇이 포함되어 있나요?
사전 녹화된 수업 4개
4 주
교사 지원 기간(주)1년
학습 내용 이용 기간숙제
Students will have three check-ins(described in the class description) to help them as they work to optimize their bridge. Each will offer the opportunity for feedback and suggestions on how to further optimize the bridge.보고계신 지문은 자동 번역 되었습니다
수업 소개
The description of this course is broken into four parts to simply the process of understanding how the FLEX element is ideal for the bridge building class. See the answers to each of these questions in the description below. Who Should Join The FLEX Bridge Challenge Class? How Does The Bridge Building Process Work? Why Choose Flex For This Class? How Do the Classes Interact During This Course? What Is The Weekly Agenda? Who Should Join The FLEX Bridge Challenge Class? 1) Everyone! Well... everyone as long as you have a computer that can run the software(It works for all Windows and Apple Users). 2) This class assumes that you have a strong understanding of comparing decimals. Several steps will involve students choosing bridge members that are greater than 0 and below 0.7. 3) Students who are looking for a real challenge. A large part of class will have students competing to create the least expensive yet safe bridge. How Does The Bridge Building Process Work? Do you have what it takes to design and test a virtual bridge using cutting edge civil engineering software? Your challenge: Harness the forces of tension and compression to build the least expensive working bridge before class time runs out. During each of our four weeks of the class you will play the role of a civil engineer and be provided with a unique design challenge and a 7 day time period to design the least expensive working bridge. Just like a real civil engineer, you will be provided with specific requirements for your bridge including height, arch vs standard truss and weight distribution. The top bridge designs will earn you a spot on our ongoing class leaderboard not to mention bragging rights. No Experience is necessary. No prior experience is necessary to learn how to use the Free Bridge Designer software. In this class you learn by doing, so even if you are 100% new to bridge designing you will learn the ropes very quickly. The first week's video will introduce the bridge software and bridge optimization. Returning students will be able to get straight to optimizing their 1st bridge design. Why Choose Flex For This Class? Holding this class using the FLEX(flexible scheduling) model allows the class to start at anytime that fits your schedule. The part of the class that I would normally guide the students through making their bridge(the least interactive part of the class) is all in a recorded format to play, pause, repeat at any pace that works for the student. The FLEX class takes place over 4 weeks rather than 4 class periods. Bridge design turn-ins are once a week with several optional teacher check-ins for support. The interactive parts of the class where students work on their own bridges, comment on other students designs and submit their bridges for a place on the class leaderboard are all still there, just without the requirement of a live meeting. I am also available to meet with any student live who needs more support than a simple Outschool message can achieve. How Do the Classes Interact During This Course? Class Interaction Each week of the class will have multiple "check-in" assignments to provide students with the opportunity to interact with the teacher, receive feedback and interact with the other aspiring civil engineers in the class. Student to Student Collaboration As they learn the ropes of the bridge program students will each choose their own bridge scenario as an extra challenge for the class to work on collaboratively and optimize during the next week. Students will post screen-shots and/or videos to show the class their progress initiating a debate on the pros and cons of each bridge modification. Students will see how each designer's personalities lead to different stylistic decisions in the bridge design process and why bridge engineers often work together as a team to develop the best design. Student to Teacher Collaboration Check-in #1 Students will provide either a copy of their current bridge file or a screenshot(Both will be explained in the introduction videos) via the Outschool classroom. The goal of this check-in will be to show that the student is working on the correct scenario and that they are comfortable with the challenge ahead. Students will share the areas they think will be the most challenging and predict possible pitfalls in their bridge design Students have the opportunity to set up a live meeting if they need help setting up the scenario. Check-in #2 Students will provide either a copy of their current bridge file or a screenshot showing the optimization that they have made on their bridge and again have the opportunity to set up a meeting for assistance or feedback. Check-in #3 Students will submit their completed bridge scenario file for judging. The top 3 lowest priced bridges will be awarded points on our class leaderboard.(3 for first, 2 for second and 1 for 3rd) Students will collaborate with the teacher and other students to further enhance the bridge design as a group. What Is The Weekly Agenda? Class Agenda Week 1: Introduction and teacher led bridge design optimization lesson. Student will be provided with a step by step video tutorial covering the following topics 1- Downloading and Installation 2- Bridge Scenario Parameters and template choice 3- Building and testing your first bridge 4- Optimizing your bridge for tension and compression 5- Advanced optimization tips and tricks 6- Bridge submission and leaderboard information Students who have completed my 1 day live course will begin at step 5 of the tutorial as they have already covered these topics. Students will have until the end of week 1 to submit their finished bridge file to the classroom. Students may submit multiple bridges for feedback during the week, but only the first bridge counts toward the leaderboard. Week 2: The class will share their designs for the first week's bridges via the Outschool classroom and points will be awarded based upon the least expensive stable bridge Scenario #2 will be introduced. Students will have until the end of week 2 to complete this scenario. Week 3: The class will share their designs for the second week's bridges and points will be awarded based upon the least expensive stable bridge. Scenario #3 will be introduced. Students will have end of week 3 to complete this scenario. Week 4 The class will share their designs for the third day's bridges and points will be awarded based upon the least expensive stable bridge Scenario #4 will be introduced. Students will have until the end of week 4 to submit their final bridge. Points will be awarded and a civil engineer winner announced. Before our first class make sure to download AND install the Bridge Designer software. This is the address of the software: https://bridgedesigner.org/download/ Note: The installation files themselves will be downloaded from a second site called Sourceforge. There will not be time to download it once the class begins. Make sure it loads on your computer. You are welcome to experiment with the program, but don't stress if things seem too complicated. We will figure it all out together.
강의 계획서
4 레슨
4 주 이상레슨1:
Introduction and bridge design optimization video tutorial Standard Truss Bridge
Student will be provided with a step by step video tutorial covering the following topics
1- Downloading and Installation
2- Bridge Scenario Parameters and template choice
3- Building and testing your first bridge
4- Optimizing your bridge for tension and compression
5- Advanced optimization tips and tricks
6- Bridge submission and leaderboard information
레슨2:
Week 2: Arch Bridge
Week 2: The class will share their designs for the first week's bridges via the Outschool classroom and points will be awarded based upon the least expensive stable bridge Scenario #2 will be introduced. Students will have until the end of week 2 to complete this scenario.
레슨3:
Week 3: Pier Bridge
The class will share their designs for the second week's bridges and points will be awarded based upon the least expensive stable bridge. Scenario #3 will be introduced. Students will have end of week 3 to complete this scenario.
레슨4:
Week 4: Suspension Bridge
The class will share their designs for the third day's bridges and points will be awarded based upon the least expensive stable bridge Scenario #4 will be introduced. Students will have until the end of week 4 to submit their final bridge. Points will be awarded and a civil engineer winner announced.
그 외 세부 사항
수업 자료
Before our first class make sure to download AND install the Bridge Designer software. This is the address of the software: https://bridgedesigner.org/download/ Note: The installation files themselves will be downloaded from a second site called Sourceforge. There will not be time to download it once the class begins. Make sure it loads on your computer. You are welcome to experiment with the program, but don't stress if things seem too complicated. We will figure it all out together.
수업 진행 언어
영어
Outschool 외 필요 앱/웹사이트
이 수업에서는 아웃스쿨 교실 외에도 다음의 툴을 사용합니다:
선생님을 만나보세요
교사 전문성 및 자격증
플로리다 교직증명서 사회/역사에
학사 학위 역사 University Of Central Florida에서
If it's tech, I teach it. As long as I can remember computers and electronics of all kind were my passion. From my first computer, a Commodore 64 with 64k RAM to my current gaming/coding laptop, I have always been enthralled by the creativity and ingenuity that technology can inspire.
I offer a variety of private and group classes.
Have an exciting tech project idea that I don't currently offer? Ask me and I will create it!
Private Lessons Currently Offered(Contact me for more details)
Unity and C# Game Design and C# Programming
Chess Lessons - Beginner to Intermediate
Micro:Bit Electronics and Coding
Setting Up Your 3D Printer
Curriculum Vitae
Bachelors Degree in History from The University of Central Florida
Florida Educator Certification in Technology, History, Business Ed, and Coding
17 years of experience teaching middle school students
Programmer on the Unity and MIT App Inventor Platforms
Fluent in the C# programming language
Every class I teach on Outschool is a subject that I personally care about and I try to kindle each students excitement about the potential of technology to change our world. I have been a gifted and talented and programming teacher for the past seventeen years. My 3D printers are always printing something interesting from a Ironman helmet to a giant dinosaur named Flexi-Rex. My classes are all about challenging students to test their limits and have a great time doing it. I look forward to meeting you in one of my classes soon!
리뷰
Michael Cohen Chess - Coding - 3D Printing Teacher님의 다른 수업
Michael Cohen Chess - Coding - 3D Printing Teacher님의 다른 수업
다른 인기 수업
Building Up Our Brains 건설 테마 1-1 유치원 및 유치원 수업
Ms. Amanda
5.0
(26)
US$22 세션당
일대일 레슨
온디맨드
3-6 세
건설적인 경쟁 댄스 비평
Lauren Sylvia - BA Dean College
4.9
(2,329)
US$43 세션당
일대일 레슨
온디맨드
3-18 세
건설 시뮬레이터(2022 버전) 소셜 게임 클럽: 빌드 및 협업
Teacher Steve
5.0
(6)
US$18회당 수업료
다음 세션은 Thu 2/27 7:30 PM 에 예정되어 있습니다.
그룹 수업
주당 1회1 시간
12-17 세
건설 알파벳 .....트럭, 도구 및 문자
Roisin Butler, M.Ed, B.Ed
5.0
(231)
US$11회당 수업료
다음 세션은 Wednesday 8:30 PM 에 예정되어 있습니다.
그룹 수업
주당 1회30분
3-6 세
글쓰기의 에이스: 문장 구성부터 문단까지
Lucia
4.9
(387)
US$18회당 수업료
다음 세션은 Thu 2/27 10 PM 에 예정되어 있습니다.
그룹 수업
7 주, 주당 1회50분
9-12 세
똑똑한 아이의 난제: 건설적으로 토론하고 의견 불일치하는 방법(10~14세)
Stephanie Alatorre (B.S. Elementary Education)
5.0
(61)
US$18회당 수업료
다음 세션은 내일 2:30 PM 입니다.
그룹 수업
주당 1회30분
10-14 세
캐릭터 디자인 및 구성 101 1.5시간
Teacher Lulu
5.0
(1)
US$70 세션당
일대일 레슨
온디맨드
7-18 세
어린이를 위한 엔지니어링 수업: 건설, 코딩, 에너지 및 에너지 정의
Ms. Monica from ConstructU
4.8
(409)
US$20회당 수업료
다음 세션은 Wednesday 5:30 PM 에 예정되어 있습니다.
그룹 수업
10 주, 주당 1회55분
7-12 세
로봇공학 소개: 간단한 로봇을 만들어 보자
Ms. Monica from ConstructU
4.8
(409)
US$27회당 수업료
다음 세션은 Mon 3/3 1 AM 에 예정되어 있습니다.
그룹 수업
4 주, 주당 1회55분
7-11 세
단어 구성(K-10을 위한 철자 기술 튜터링)
Teacher Michelle Lin E.dS Certified Educator!
4.9
(84)
US$25 세션당
일대일 과외
온디맨드
7-12 세
분노 관리—분노는 정상입니다! 좋은 선택을 하고 건설적으로 표현하세요
Regina Holloway M.A./Ed.S
4.8
(788)
US$13회당 수업료
다음 세션은 Mon 3/10 3 PM 에 예정되어 있습니다.
그룹 수업
1 주, 주당 2회45분
8-13 세
Bricktastic 엔지니어링 챌린지(8-12세)
Ian Nelson
4.7
(2,521)
US$15회당 수업료
다음 세션은 Tue 3/4 12 AM 에 예정되어 있습니다.
그룹 수업
4 주, 주당 1회50분
8-12 세
Cities Skylines로 꿈의 도시를 건설하고 관리하세요
mark chadwick
4.9
(20)
US$18회당 수업료
다음 세션은 Sunday 5:30 PM 에 예정되어 있습니다.
그룹 수업
주당 1회1 시간
9-13 세
벽돌과 이야기로 건축하기, "해리와 공룡 양동이" 스팀
Teacher Sharon, M.Ed., TEFL
4.9
(925)
US$13회당 수업료
다음 세션은 오늘 7 PM 입니다.
그룹 수업
1 주, 주당 1회35분
5-8 세
레고 클럽: 주간 빌딩 챌린지
Mrs. Maggie
4.9
(283)
US$9회당 수업료
다음 세션은 내일 5 PM 입니다.
그룹 수업
주당 1회45분
6-11 세
마스터 빌더 클럽: 기술, 재미있는 빌드 등!
Savannah Gilmore
4.8
(2,295)
US$8회당 수업료
다음 세션은 오늘 11 PM 입니다.
그룹 수업
주당 1회1 시간
7-12 세