Outschool
Abrir configuración de moneda, zona horaria e idioma
Iniciar sesión

Aprenda a programar en Python con Raspberry Pi (Flex)

En esta clase de 12 semanas, los estudiantes explorarán Raspberry Pi, Linux y aprenderán a codificar en Python.
Anthony Hasting
Puntuación media:
4.9
Número de reseñas:
(58)
Clase

Qué está incluido

Experiencia de clase

Students will learn how to code in Python using the Raspberry Pi!

Week 1: What is the Raspberry Pi
Objective: Students will get familiar with the Raspberry Pi and its basic functions. We will start with a physical tour of the Raspberry Pi and end with setting up and configuring the Raspberry Pi. 
Required Items: 
* Raspberry Pi 3 (or newer)
* 5V 2.5A micro USB Power Supply
* 32GB Preloaded (Noobs) microSD Card for Raspberry Pi

Week 2: Getting started with Linux
Objective:  Students will be introduced and get familiar with Linux desktop and command line. We will learn about various applications needed to support Python. 

Week 3: Fundamentals of Python
Objective:  Students will learn about the different versions of Python, Python shell and editor. We will then learn about numbers, variables and For Loops. 

Week 4: Strings, Lists and Dictionaries
Objective:  Students will learn the differences between strings, list, functions, and dictionaries as they complete a variety of exercises. 

Week 5: Modules, Classes and Methods
Objective:  Students will learn the differences between Modules, Classes and Methods, when and how to use them. 

Week 6: Files and the internet
Objective:  Students will learn to retrieve content from the internet. We will also learn to read and write data to files on the Raspberry Pi.

Week 7: GUI (Graphical User Interface)
Objective:  Students will be introduced to programming Graphical User Interfaces, such as, dialog boxes, buttons, and windows. 

Week 8: Games Programming
Objective:  Students will learn to use the library pygame to build a simple game. 

Week 9: Interfacing Hardware
Objective:  Students will learn how to interface electronic components with the Raspberry Pi’s GPIO pins. Some of the components are breadboards, LEDs, resisters and capacitors.

Week 10: LED Fader Project
Objective:  Students will create a program to control the display of a multi-color LED using the Tkinter library and the RPi.GPIO power management feature. 

Week 11: Python Project - Clock
Objective:  Students will create a digital clock building on knowledge learned in previous classes.

Week 12: Raspberry Pi Robot
Objective:  Students will learn to program a Raspberry Pi controlled Robot combining all the skills learned in this series. 

Each week the students will submit a completed assignment to the Outschool classroom. 

*Please note, grades (letter/percentage) are not issued for this course.

**The closing date for classes will be one week after the last session.  Work submitted after the close date will not receive feedback.

For interaction: Students will post their work in the classroom to share with one another. Students will ask each other questions and be able to give tips and demonstrations to explore new and innovative ways to code in Python. Students can post screenshots in the classroom to receive feedback from me as well as other students. The more we share, the more we will learn. I will be checking the classroom every Monday and Thursday to give feedback and to answer questions. 

I look forward to working with as you learn Python!

Otros detalles

Lista de útiles escolares
*** Some items below have a link to Amazon.com if you need to purchase prior to class. Be sure to copy the entire link and paste into your browser ***

******* Need by Week 1 ******* 

* Raspberry Pi 3 (or newer) 
This is a Raspberry Pi 4 Kit that comes with a case and power adapter $229.99
https://www.amazon.com/Vemico-Raspberry-Starter-Heatsinks-Screwdriver/dp/B09WQPRTJ5/ref=sr_1_14?crid=2REXB2M8NUA5U&keywords=raspberry+pi+4&qid=1655130473&s=electronics&sprefix=raspberry+pi+4%2Celectronics%2C147&sr=1-14


* (ONLY NEEDED IF YOU ARE BUYING A RASPBERRY PI 3)  5V 2.5A micro USB Power Supply $9.95
https://www.amazon.com/CanaKit-Raspberry-Supply-Adapter-Listed/dp/B00MARDJZ4/ref=pd_bxgy_img_3/135-5011647-1921646?_encoding=UTF8&pd_rd_i=B00MARDJZ4&pd_rd_r=cea25cc7-9f6b-498d-853c-df9987830ceb&pd_rd_w=afXsv&pd_rd_wg=Tm0JK&pf_rd_p=ce6c479b-ef53-49a6-845b-bbbf35c28dd3&pf_rd_r=VERZZJHJ5TWHPB03HW4M&psc=1&refRID=VERZZJHJ5TWHPB03HW4M


* 32GB Preloaded (Noobs) microSD Card for Raspberry Pi $12.99
https://www.amazon.com/GeeekPi-Preloaded-Raspberry-MicroSDHC-Memory/dp/B0856TW4JW/ref=sr_1_3?dchild=1&keywords=raspberry+pi+noobs&qid=1596480041&s=electronics&sr=1-3

* Monitor or TV with HDMI input
* HDMI Cable
* USB Keyboard
* USB Mouse
* Internet Access (WiFi or wired)



****** Need by Week 9 *******

* Capacitor $4.72 (120 pieces)
https://www.amazon.com/MCIGICM-0-22uF-470uF-Electrolytic-Capacitor-Assortment/dp/B07PG8LSKY/ref=sr_1_8?dchild=1&keywords=.22uF+Capacitor&qid=1602372640&sr=8-8


* LED Assortment $4.99 (100 pieces)
https://www.amazon.com/MCIGICM-Circuit-Assorted-Science-Experiment/dp/B07PG84V17/ref=sxin_9_ac_d_rm?ac_md=2-2-bGlnaHQgZW1pdHRpbmcgZGlvZGVz-ac_d_rm&cv_ct_cx=LED+pack&dchild=1&keywords=LED+pack&pd_rd_i=B07PG84V17&pd_rd_r=187e4cca-2e73-4e6d-a477-d15346b81c5d&pd_rd_w=iVb4t&pd_rd_wg=kiggn&pf_rd_p=fe2d64f9-a0d4-4c62-b195-55e240bc5b7e&pf_rd_r=M2CWC8CZ02EK93SSJSBK&psc=1&qid=1602372706&sr=1-3-12d4272d-8adb-4121-8624-135149aa9081


* Breadboard $6.49 (4 pieces)
https://www.amazon.com/Pcs-MCIGICM-Points-Solderless-Breadboard/dp/B07PCJP9DY/ref=sr_1_4?dchild=1&keywords=half+Breadboard&qid=1602372796&sr=8-4


* Resistors $5.99 (31 values, 775 pieces)
https://www.amazon.com/Cutequeen-Values-Compliant-Resistor-25pcs/dp/B016NXK6QK/ref=sr_1_8?crid=2AJCJJCYZH849&dchild=1&keywords=1k+ohm+resistor&qid=1602372870&sprefix=1k%2Caps%2C162&sr=8-8


* Photoresistor $3.99 (30 pieces)
https://www.amazon.com/MCIGICM-Photoresistor-Sensitive-Resistor-Dependent/dp/B07PF3CWW9/ref=sr_1_3?dchild=1&keywords=photoresistor&qid=1602373021&sr=8-3


* Jumper Wires Male to Female $6.99 (40 pieces)
https://www.amazon.com/Foxnovo-Breadboard-Jumper-Wires-Female/dp/B00PBZMN7C/ref=sr_1_11?crid=A67H8DOVH6TE&dchild=1&keywords=breadboard+jumper+wires+male+to+female&qid=1602373127&sprefix=breadboard+%2Caps%2C159&sr=8-11




******* Need by Week 10 *******

* 5mm RGB Multicolor Diffused Common Anode LED $8.96 (50 pieces)
https://www.amazon.com/gp/product/B01C3ZZT8C/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1




******* Need by Week 11 *******

* Jumper Wires Female to Female $9.99 (100 pieces)
https://www.amazon.com/gp/product/B07GJLTHH5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

* 4-Digit Tube LED 7-Segment Display Module Red Common Anode TM1637 $5.49 (2 pieces)
https://www.amazon.com/gp/product/B01DKISMXK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1




******* Need by Week 12 (OPTIONAL) *******
Below are the parts necessary to build the Rover to be programmed in the Week 12 video. The parts for this rover will cost approx. $106 using the Amazon.com links below. Purchasing this kit is optional and the Learner will still benefit from following along with the video.

* VELCRO Brand 2x1 Inch Adhesive	$6.79
https://www.amazon.com/VELCRO-Brand-Sticky-Fasteners-Perfect/dp/B000GAU540/ref=sr_1_6?dchild=1&keywords=VELCRO+Brand+4x2+Inch&qid=1606158287&sr=8-6

* 4 Inch Self Locking Cable Ties $3.99
https://www.amazon.com/Multi-Purpose-Nylon-Zip-Ties-Ties-White/dp/B07R46214L/ref=sr_1_3?dchild=1&keywords=4+Inch+Self+Locking+Cable+Ties&qid=1606158359&sr=8-3

* Tenergy Universal RC Battery Charger for NiMH/NiCd 6V-12V  $19.99
https://www.amazon.com/gp/product/B001AVUAVC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Venom Tamiya Plug Set, Male/Female $5.99
https://www.amazon.com/Tamiya-Battery-Device-150mm-Venom/dp/B000HKEVH6/ref=sr_1_5?dchild=1&keywords=Venom+Tamiya+Plug+Set%2C+Male%2FFemale&qid=1606158426&sr=8-5

* Tenergy NiMH Battery Pack 12V  $22.99	
https://www.amazon.com/gp/product/B077Y9HNTF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

* Portable Charger 10000mAh  $32.99
https://www.amazon.com/Upgraded-Smallest-10000mAh-AINOPE-Portable/dp/B07XW7ZVKD/ref=sr_1_3?crid=2Z8M384KBHBG&dchild=1&keywords=ainope+portable+charger&qid=1629035314&sprefix=ainope%2Caps%2C173&sr=8-3

* L298N Motor Drive Controller  $8.69
https://www.amazon.com/gp/product/B01M29YK5U/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

* The perseids DIY Robot Smart Car Chassis  $17.99
https://www.amazon.com/gp/product/B07DNXBFQN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Recursos externos
Los estudiantes no necesitarán utilizar ninguna aplicación o sitio web más allá de las herramientas estándar de Outschool.
Se unió el June, 2020
4.9
58reseñas
Perfil
Experiencia y certificaciones del docente
Licenciatura desde Mount Vernon Nazarene University
I am an Information Technology professional with more than 25 years' experience working in technology, leadership, and mentoring. I have been involved with coaching sports teams, technology teams and Boy Scouts. I have taught mor than 200 learners on the Outschool platform.  I love sharing my passion and knowledge of science and technology with kids of all ages. I have taught many science and space classes and camps for kids over the years. I love to research and take things apart to see how they work. I am excited to have your child join my class!

Reseñas

Clase grupal
Compartir

13 US$

semanalmente o 150 US$ por 12 semanas
12 semanas

Completado por 50 alumnos
No hay videoconferencias en vivo
Edades: 9-14

Esta clase ya no se ofrece
Acerca de
Apoyo
SeguridadPrivacidadPrivacidad de CAPrivacidad del alumnoAdministrar preferencias de datosTérminos
Obtener la aplicación
Descargar en la App StoreDescargar en Google Play
© 2024 Outschool